Urbinati RW32 Transplanter

The Urbinati RW32 Transplanter is designed for continuous planting. This means that the destination trays come into the machine in a continuous a line without gaps between the trays. The Urbinati RW32 Transplanter works out where to plant using up to 36 fingers for seedling transplanting on a maximum working width to 2100 mm.

This machine is able to takes seedling from up to 4 cell trays at a time with pinpoint accuracy. A colour touch screen makes selecting programs simple and as always, Transplant Systems will train operators in its use after installation, so they can easily get production up to speed. Huge labour savings are to be had with the Urbinati RW32 Transplanter.

Users can program their own trays into the machine, give a huge range of options. The computer saves all the programs. Diagnostic screens give the feed back on inputs and out put to simplify fault-finding. The machine can work at the speed you set, and can run in Automatic mode or manual mode. It is also possible to step the machine with a press of a button to see each programmed step.

The Urbinati RW32 Transplanter can operate with up to 32 fingers, or less if required. If one finger has a problem then it can be taken off the track and the new one added or operate with fewer fingers. All of this can be done with the use of tools, and there is no need to shut the machine down to wait for a technician.

Note the needles on this machine are not round, so they give better grip on the plug as they gently lift the seedling out of the tray for transplanting.

Urbinati RW32 Transplanter

TECHNICAL DATA	M.U	RW32
HOURLY PRODUCTION (max)	finger cycles/hour	800
WIDTH of WORKING (max)	mm	600
WEIGHT	Kg	960
POWER of INSTALLATION	kW	3
AIR CONSUMPTION (max) (suggested mod. A39B/200CT3)	l/min	80

Urbinati RW32 Transplanter

x

xx
Thermoformed tray block in the source. Exit conveyor belts. End rollers. Tray holding racks. Device to transplant into single pots. Laser for polystyrene trays. Finger with int. 41 mm for big cells Singulary motorised wireless finger 8.4” colour touch-screen Programmable directly from the terminal Self-diagnostics shown on terminal Removable fingers with inter-axis min. 31 mm One command for finger opening/closing Tray width max. 600 mm Accumulation belt Production fingers: 1000 cycles/hr Installed power 2 kW 400V 3-phase 50/60/Hz Air consumption 80 L/min Weight: 650 kg

Urbinati RW32 Transplanter

Overview
Specifications
PDF
Watch Video
Enquiry

Urbinati RW32 Transplanter

The Urbinati RW32 Transplanter is designed for continuous planting. This means that the destination trays come into the machine in a continuous a line without gaps between the trays. The Urbinati RW32 Transplanter works out where to plant using up to 36 fingers for seedling transplanting on a maximum working width to 2100 mm.

This machine is able to takes seedling from up to 4 cell trays at a time with pinpoint accuracy. A colour touch screen makes selecting programs simple and as always, Transplant Systems will train operators in its use after installation, so they can easily get production up to speed. Huge labour savings are to be had with the Urbinati RW32 Transplanter.

Users can program their own trays into the machine, give a huge range of options. The computer saves all the programs. Diagnostic screens give the feed back on inputs and out put to simplify fault-finding. The machine can work at the speed you set, and can run in Automatic mode or manual mode. It is also possible to step the machine with a press of a button to see each programmed step.

The Urbinati RW32 Transplanter can operate with up to 32 fingers, or less if required. If one finger has a problem then it can be taken off the track and the new one added or operate with fewer fingers. All of this can be done with the use of tools, and there is no need to shut the machine down to wait for a technician.

Note the needles on this machine are not round, so they give better grip on the plug as they gently lift the seedling out of the tray for transplanting.